What you will need:

• Assortment of permanent markers
• White iPhone case
• Ruler (not shown)
• Pencil (not shown)

Steps:

1. Find a print you would like to replicate. I liked this one:

2. On the case draw the center lines in pencil as guidelines. Erase the lines, so that you can barely see them.

3. Start drawing! Be careful not to smudge!

4. Continue the design on the sides and the top of the case.

5. Once you’re done drawing, put it on your phone and amaze all your friends

• Earring hooks
• Light green beads (big)
• Dark green beads (small)
• 8 pieces of shamrock shaped confetti
• Hot glue gun (not pictured)

Steps

1. String beads, if not already strung.Make sure there is enough string at the top to tie on the hooks and the bottom to attach the shamrock!

2. Take your first strands and tie them onto the earring hooks.

3. Take your second strands of beads and tie them to the hooks.

4. Take the hot glue and place glue on top of a shamrock.

5. Place the string into the glue. Take another shamrock and push the two together, sandwiching the string.

6. Do this to all four strands and you’re done!

What You Will Need:

• Stones
• Paint (Red and Pink)
• Paint Brushes

Steps:

1. Find stones from outside
2. Rinse off any dirt
3. Once dry, start painting! I took inspiration from the candy hearts and all there little messages
4. Give to your Valentine!

What You Will Need:

• Your Keys
• Nail Polish
• Paper Towel / Napkin

Steps:

1. Paint one side of the key. Let dry and apply second coat if needed.

2. Once dry, flip over and paint again. That’s it! Very simple haha

Click here to purchase the map!

What You Will Need:

• Headphones
• Embroidery Floss
• Scissors

Steps:

1. Tie string to the end of the headphones.

2. Using the “Chinese Staircase” pattern, work your way down the headphones. If you don’t know how to create a staircase click here.

3. Once you feel like adding another colour just tie the string over the first one.

4. Using the new string, continue the staircase.

5. Just keep doing that…

6. … until you’re done!

What You Will Need:

- Enough beer bottles to make your tree. We used a total of 56 bottles to make 5 tiers.

- White or hot glue

- Cardboard

- A Pencil/Pen

- Scissors

Steps:

1. Rinse out all the bottles, you don’t want your tree to start smelling!

2. Put your bottles in piles of 1, 3, 7, 15 and 30.

3. Start gluing the bottles onto your base.

5. On a sheet of cardboard, put the next tier on, trace around and cut out the circle.

6. Glue the tops of the bottles.

7. Put the cardboard cutout on top and start gluing down the second tier.

8. Repeat steps 5 to 7, for the next tiers.

9. Make a star! We made one with paper and a stick

10. Carefully add lights and you have a 100% recycled tree!!!

Image from American Apparel

What You Will Need:

- Scarf
- Scissors
- Needle and Thread

Steps!

1. Fold your scarf in half, make sure that it is inside out.

2. Thread the needle through both sides of the scarf and tie it together

3. Just stitch your way across the scarf!

4. When you get to the end, tie it up and turn it right side out! Done!! All ready for winter!!!

10 points to whoever can name all the cities in the order I posted them

Make sure to check out all of Moxy Creative House posters!

What You Will Need:

• A DSLR camera that can do long exposures, or one that has “bulb” mode.
• A tripod
• Flashlights or any type of lights
• A dark room / the night
• Friends (1 person to man the camera and people to draw and pose)

Steps:

1. Place your camera on a tripod, due to the long exposures you want your camera to not move.
2. Set your camera to “bulb” mode or set the exposure to a long value.
3. Have one person hold down on the shutter release button.
4. Now its time for the people to “paint” the designs, using the flashlights. Make sure that the light always faces the camera otherwise it will not work. Also the slower the light moves, the brighter the light will appear.
5. Once finished “painting” the person holding the shutter button, should let go and you will get your image!!